Damper Brackets For Linear Pots

These sturdy & light weight Clamp-Brackets are designed to fit 45mmPenske dampers.
They are designed for linear pots that use 5mm or 3/16″ (#10) eyelets.
The post height will give a spring clearance for up to 3.75″ outside diameter springs. Data can be collected exactly as the damper moves without calculating any motion ratios by using this system. The mount on the opposing end can be done by welding a #10 bolt to the existing damper mount bolt and using a spacer tube to raise the pot to the correct height. Clamp Brackets are $35 each. Set of 4 – $129